All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track
by E. Emerson Tool Co
List Price:
Our Price: $24.99
You Save: $9.00 (26%)
Availability: Usually ships in 1-2 business days
Category: Tools
See more product details
Product Details
Manufacturer: E. Emerson Tool CoModel: A-24
Product features:
- T-track accepts all the accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs
- T-track accepts all accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs etc.
- All in one clamps are all the same height the thickness matches 3/4 plywood
- Scale ruler available in metric or inch
- Jaws holes accept accessories:tall jaws wide jaws story sticks
- Exploring Woodworking: Fundamentals of Technology
- Fine Woodworking
- Gorilla Glue 50008 Adhesive, 8-Ounces
- All in One Clamp SP 9-Inch X 12-Inch Saw Plate
- All in One Clamp RP 8-Inchx 9-Inch Router Plate
Description of All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track
The Single Clamp is a simple and straight forward tool. Most commonly used as a straight edge guide for making clean cuts with your circular saw and router. Other uses include but not limited to; a fence for a table saw and drill press.The E. Emerson Tool Company A-24 All-in-One 24-Inch Grip Clamp Guide uses edge to edge clamps that are quickly adjustable and low profile, unobtrusive jaws to secure wood while staying out of your way. The tall, wide jaws provide flexibility, and the jaw holes accept steel jaw teeth for use on steel tables, and the scale ruler can be used for metric or inch measurements. The built-in T-track accommodates all manner of accessories, such as router plates, stop blocks, and jigs. The clamp thickness matches 3/4-inch plywood sheets, and a micro-adjustable stop provides superior precision in a tool given 5 stars by Popular Woodworking magazine.
Tools and Hardware Reviews of All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track
Customer Review: Uses for All in One Clamps
Summary: 4 Stars
The E. Emerson clamps work well for making all types of jigs for table saws, band saws, drill presses and router tables.
I make small boxes and needed a 45 degree jig to hold boards at an angle to my table saw top. It is far easier to mount the board at an angle than to crank the blade back and forth. I use this jig when I miter box corners larger than will fit under my sliding radial blade or when I am working with smaller pieces that put a blade too close to my fingers. The combo clamps are just the thing for this. The face down side clamp holds to the jig and the face up side holds the work against a guide.
I also use one on my drill press to allow me to drill concentric holes, straight lines of holes and keep pieces from spinning when using large fostner bits.
I have another of thse clamps on my band saw to hold a home made fence for re-sawing boards. It is easy to reset and when flipped to the full hold position doesn't move.
Finally, I use one on a simple router table. The table is just the router mounted beneath a two foot square board with a straight bit protruding through a center hole. The table has a 2x4 attached to one side this 2x4 is used to secure the table in my wood vise. The all in one clamp gives me a great straight edge and works like a charm to miter in hinges on the back side of lids and bottoms. I can set it up to do the outside edges of both hinge cuts for the bottom and the top then reset it for the inside edges of the hinges and the top and bottom miters match exactly when the box is assembled.
I keep making time saving jigs using these handy clamps. They're great.
Router Accessories & Parts
Tools and Hardware
Bestsellers in Router Accessories & Parts
Porter-Cable 42188 2-1/ 2-Inch Hole Sub BasePorter-Cable; Tools
Best price: $9.80
Price in other shops:
All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-TrackE. Emerson Tool Co; Tools
Best price: $57.28
Price in other shops:
Porter-Cable 75182 Variable Speed Router MotorPorter Cable; Tools
Best price: $259.99
Price in other shops:
Porter-Cable 42000 9-Piece Template Guide KitPorter-Cable; Tools
Best price: $26.99
Price in other shops:
Bosch RA1100 Threaded Router Template Guide AdapterBosch; Tools
Best price: $5.06
Price in other shops:
Dewalt DW6913 Router Edge Guide with Fine Adjustment and Vacuum AdaptorDEWALT; Tools
Best price: $37.61
Price in other shops:
Kreg Precision Router AccessoriesKreg; Tools
Porter-Cable 42690 Edge Guide (for Models 100, 690, 691, 693, 891, 892, 893 Routers)Porter-Cable; Tools
Best price: $33.99
Price in other shops:
Porter-Cable 42999 1/ 4-Inch Self Releasing ColletPorter-Cable; Tools
Best price: $10.39
Price in other shops:
Bosch PR010 Round Subbase for Threaded Temp Guides for Bosch Colt Palm RoutersBosch; Tools
Best price: $6.63
Price in other shops:
Similar Tools and Hardware Products
All in One Clamp TJ Tall Jaws Set of 4E. Emerson Tool Co; Tools
Best price: $14.76
Price in other shops:
All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-TrackE. Emerson Tool Co; Tools
Best price: $57.21
Price in other shops:
All in One Clamp A-12 12-Inch Grip Clamp Guide with T-TrackE. Emerson Tool Co; Tools
Best price: $16.39
Price in other shops:
All in One Clamp A-36 36-Inch Grip Clamp Guide with T-TrackE. Emerson Tool Co; Tools
Best price: $26.79
Price in other shops:
All in One Clamp SB Stop Block w/ Micro AdjustmentE. Emerson Tool Co; Tools
Best price: $14.69
Price in other shops:
All in One Clamp RP 8-Inchx 9-Inch Router PlateE. Emerson Tool Co; Tools
Best price: $26.99
Price in other shops:
All in One Clamp SP 9-Inch X 12-Inch Saw PlateE. Emerson Tool Co; Tools
Best price: $23.94
Price in other shops:
All in One Clamp U99 99" Ultra All In One ClampE. Emerson Tool Co; Tools
Best price: $115.95
Price in other shops:
All in One Clamp WJ Wide Jaws (2-Pack)E. Emerson Tool Co; Tools
Best price: $15.99
Price in other shops:
All in One Clamp A-50 50-Inch Grip Clamp Guide w/ T-trackE. Emerson Tool Co; Tools
Best price: $29.99
Price in other shops: