Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System
|
|
List Price: Our Price: $699.99 You Save: $295.01 (30%) Availability: Usually ships in 24 hours Category: Tools See more product details |
|---|
-spray fine finishes such as lacquer and water borne finishes
-also spray thin stains as well as occasional latex and oil-based paints
-variable air pressure for more control
-spend less than $1,000
This unit has satisfied those goals very well. The variable air control is really a must, in my opinion, otherwise I cannot adequately control the atomization. This air control works very well on this unit. It does not vary the motor speed, but varies the flow through the hose with a convenient control located at the gun handle - you can vary the flow as you work and fine tune it without having to run back to the compressor unit to make adjustments. I just turn the unit on and then make all the adjustments at the gun.
This unit sprays everything have tried very well: thinned lacquer, straight stains and dyes, latex paint (with Flotrol), and slightly thinned oil base paint. The finishes are extremely smooth.
Once I have the air and fluid controls set for a given project, the amount of overspray is really remarkably small. Although it is possible to create a lot of overspray, that usually means the air control is set to high.
The unit is very easy to clean - usually I just run solvent through the gun after every coat. Then thoroughly clean the needle and nozzle after the project.
A bonus for me is the sound level of the unit - it is really very low - it is like a mid range "whoosh" . Definitely not a loud unit at all. I find that once I have everything adjusted and start spraying, I do not even pay attention to the sound of the unit at all. I understand that some other brands have very irritating noise levels. Not so here.
I also appreciate the manufacturer's after sale support. Very helpful. I also purchased (from Fuji direct) the 6 foot whip hose and the set of small plastic cups for small jobs. The whip hose is very light and I find it very helpful in maneuvering in my small spray area.
I have been happy with the needle/nozzle combination which came with the unit, although my guess for the majority of my lacquer work, the #3 nozzle would work fine also.