 |
RIT Sun Guard Laundry Powder by RIT
List Price: $4.69Our Price: $1.99You Save: $2.70 (58%)Availability: Usually ships in 1-2 business days Category: Home See more product details
Product DetailsManufacturer: RIT Brand: RIT Edition: Kitchen Publisher: RIT Studio: RIT Music Label: RIT
Description of RIT Sun Guard Laundry PowderRit Fabric Treatments are specially formulated to handle tough laundry problems, yet gentle enough to not harm fabric fibers like chlorine bleach can. Sun Guard 1 oz- Puts an invisible shield into clothing that helps block more than 96% of the sun's harmful rays from reaching your skin. Simply add it to the wash cycle, rinse and dry as usual. It won't change the color or comfort of clothing, and one treatment is good for repeated washings. It's safe for the whole family! Read complete Directions and Cautions before use.
Tools and Hardware Reviews of RIT Sun Guard Laundry PowderCustomer Review: CANNOT BE USED IN A FRONT LOAD WASHER!!! Summary: 2 Stars
I was totally excited about this product, as I have very fair kids. I was very disappointed after reading the directions that it is a total pain to use in a front load washing machine. In contacting the manufacturer, this is what they said...
RIT PRODUCT USE & FRONT-LOAD WASHER GUIDELINES
GETTING STARTED
The settings and options of various front-load washing machines vary among manufacturers. Even though there are slight differences among differing manufacturer's wash settings, they are common in that they all introduce water to the tumbler once the garment is placed inside. They allow a time period to introduce detergent (or dye in this case), and they all finish with a spin cycle.
It is important to use the washer's hottest water setting. Additionally, a wash cycle of at least 30 minutes is recommended to obtain a satisfactory dyeing.
Because front-load washers have built-in heaters to maintain the washer's temperature and the water to fabric ratio is relatively high as compared to top-load machines, deep, rich colors can be achieved using Rit dyes.
DYEING WITH RIT DYE
Follow the package or label instructions as you normally would. There are two exceptions to the package's instructions when using a front-load washer. One, it will be necessary to place the wet fabric into the washer before beginning the dye cycle. Second, when dyeing with Rit powder or liquid dye in a front-load machine, it is necessary to pre-dissolve the dye into four cups of very hot tap water. Once dissolved, pour the dye solution into the washer's dispenser at the appropriate time you would add detergent. After the dye solution has entered the washer, it will be necessary to flush the dispenser with another four cups of very hot tap water.
In many cases immediately after adding the dye solution, the garment may have a mottled appearance. This appearance will become level as the dyeing process continues.
ADDING SALT
If salt is desired when dyeing a cellulose material, the salt should be pre-dissolved into four cups of very hot tap water, added to the dispenser, and thoroughly flushed with another four cups of very hot tap water after the dyeing has proceeded for about 10 minutes.
IMPORTANT
. One package or one-half bottle dyes 1 lb. dry weight or about 3 yards medium fabric to a medium color. Never use more then a total of 4 packages or 2 bottles of Rit Dye. Depending on your washer's brand, the dyeing may be slightly darker than the color represented on the package or bottle.
. For most washable fabrics. Not recommended for 100% polyester, 100% acrylic or fabrics with special finishes, rubber backing, washable only in cold water or labeled Dry Clean Only.
. Use Rit Color Remover before dyeing fabric to a lighter or different color.
CLEAN-UP
Clean washing machine immediately after dyeing has completed using the hottest water setting. Since the machine automatically weighs fabric to determine the water level, be certain to place 3-4 old towels into the washer along with detergent and 1 to 2 cups chlorine bleach. Wipe spills with chlorine bleach solution. Plastic or rubber parts may be tinted but will not stain laundry.
RIT FABRIC TREATMENTS
All Rit fabric treatment products may be used in a front-load washer. Like Rit dyes, it is important to pre-dissolve the Rit fabric treatment into four cups of very hot tap water and thoroughly flush the dispenser with another four cups of very hot tap water.
IMPORTANT
When pre-dissolving Rit Fabric Treatment, AVOID BREATHING DUST AND USE WITH ADEQUATE VENTILATION.
. Be sure to follow manufacturer's fabric care labels when washing, drying, and pressing.
. Wear rubber gloves.
With all of the front loaders being sold, I would think that they would develop something a little more user friendly.
Also, if the item already has sun protection added to it then our product would most likely not adhere. It will usually adhere to nylon, but we do not recommend using the product on items that already contain a special finish.
Products
|
 |
|
|
|