| ||||
 SE 30Pc Diamond Bur 1/8" Shank- 40 GritBest Price: $4.50 As a stone carving instructor I am always looking for bits and such to put carving kits together... |  2pcs standard SANDING BAND MANDREL 1/2" DiameterBest Price: $4.41 |  Dremel 9985 5/8 inch Round Structured Tooth Carbide CutterRegularly $9.97 - Dremel 9985 5/8 inch Round Structured Tooth Carbide Cutter, 1/4 inch shank.... |  12 Piece Polishing WheelUPC: 794685151408 A multi purpose, assortment. Ideal for polishing and cleaning. For use on... |  RotoZip SC16 1/8-in RotoZip® SabreCut Bit Pack (16 pk)Best Price: $24.56 Includes 1/8-in RotoZip SabreCut Bit Pack (16 pk) - SC16 |
 Dremel 114-677: DREMELite? |  Dremel 114-941: Grinding Points |  Dremel 480 1/8" ColletBest Price: $2.84 Dremel 480 1/8-inch collet for models 245, 250, series 3 and later; 260, 270, 280, series 2 and... |  Dremel 114-921: Grinding Points |  SUPER CARBIDE ROUND NOSE TAPER SMALLBest Price: $32.95 These are very aggressive, long lasting carbide burs for fast waste removal yet they leave a... |
 #333 LARGE PEAR CARBIDEBest Price: $2.25 These burs leave a surface that looks much like it has been worked with a knife or gouge. |  3/32" CARBIDE TREEPOINT CONEBest Price: $12.95 These are very aggressive, long lasting carbide burs for fast waste removal yet they leave a... |  STUMP CUTTER BALL MEDIUMBest Price: $8.95 Stump cutters are made from solid Tungsten carbide brazed to a heat treated steel shank. The... |  3/32" CARBIDE ROUND END CYLINDERBest Price: $12.95 These are very aggressive, long lasting carbide burs for fast waste removal yet they leave a... |  3/32" CARBIDE ROUND END TREEPOINTBest Price: $12.95 These are very aggressive, long lasting carbide burs for fast waste removal yet they leave a... |
 VANADIUM STEEL PEAR LARGEBest Price: $8.95 These are inexpensive cutters designed for cutting all soft materials such as soft wood,... |  1/16" DIAMOND SMALL TAPERED CYLINDERBest Price: $6.50 Diamond cutters are best suited for jobs where delicate finishing is required. |  1/16" DIAMOND BALLBest Price: $6.50 Diamond cutters are best suited for jobs where delicate finishing is required. |  VANADIUM STEEL OVAL SMALLBest Price: $7.95 These are inexpensive cutters designed for cutting all soft materials such as soft wood,... |  Dremel 453 5/32" Grinding Stone, 2 PackBest Price: $2.73 Bought the Dremel chain saw sharpener that works great and bought the extra stones to get the... |
 Dremel 654 1/4" Straight Routing BitBest Price: $1.98 Needed a router bit for a single project, so the price was right, about a fourth of the price of... |  Dremel #8193 5/8" Wheel GrinderBest Price: $0.75 Dremel 5/8" Wheel Point/Sharpening, 1/8" Shank Ideal for sharpening, deburring and... |  DEWALT DW6609 1/4-Inch Window and Door BitBest Price: $4.79 This bit hasn't been subject to very much cutting, but has held up well to some drywall and... |  RotoZip SEG1 Straight Edge Guide KitBest Price: $18.99 I bought this attachment to help with routering a straight line. It did the job but I ended up... |  Dremel 115 High Speed CutterBest Price: $0.01 Excellent product, easy to use with any Dremel set and great for channeling small aluminum... |
 Dremel 125 High Speed CutterBest Price: $0.25 Dremel 1/4" High-Speed Tapered Cutter, 1/8" Shank Ideal for shaping, hollowing,... |  ROTOZIP 75-2MDG RZ1 Spiral Saw with Jigsaw Handle Kit by BoschThe new rotozip is fantastic! The 3-jaw chuck works great (works like my drill). It also... |  Roto-Zip Metal Cut-Off Zip WheelCuts ferrous metals, steel, iron, guttering, angle iron, pipe, tempered masonite, sheet metal,... |  X-LARGE TREEPOINT CARBIDE CUTTERCarbide burs have a solid carbide cutting head brazed to a steel shank. They are designed for... |  SMALL FLAT TAPER BLUE STONEBest Price: $2.50 Foredom has just introduced the new Ceramcut Blue! Stones for texturing, feathering, and... |
 LARGE CYLINDER BLUE STONEBest Price: $2.50 Foredom has just introduced the new Ceramcut Blue! Stones for texturing, feathering, and... |  5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000Dremel 90930 For use with Model 275, 285, 395 and 595* rotary tools (Type 3*, 4*, 5* and 6... |  Dremel 220-01 Rotary Tool Work StationBest Price: $36.64 This Dremel rotary tool (drill press) work station made my day. It helped me drill holes on a... |  5 Pack Dremel 105 1/32" Engraving Cutter 3/32" ShankDremel 105 A high-speed cutter designed for precision engraving, 3/32" (2,4mm) shank. Ideal... |  Dremel 855-01 10.8V Lithium-Ion Battery PackBest Price: $42.71 As with any battery operated power tool, having two or more batteries on hand is always nice. I... |
 8 pc. Rotary Steel Cutter SetBest Price: $10.00 |  Dremel 3962The 3962 product by Dremel is a MULTI PRO ROTARY TOOL KIT/72 ACCESS from the Merrow Global... |  Dremel 7117 Diamond Disc Point (3/32" Shank)Dremel 7117 Diamond Disc Point (3/32" Shank) |  RotoZip RZ-DISC50 Sanding Disc (2pk) |  RotoZip XB-LF5 Laminate Flooring X Bit, 5-PackBest Price: $49.43 For use with the RotoZip Spiral Saw System . Choose the right bit for the job and get quick,... |
 Proxxon 28760 13/64-Inch Tungsten Carbide Milling Cutter SphereBest Price: $19.84 Tungsten carbide milling bits Made of high-compressed wear-resistant tungsten carbide for... |  Dremel 426B 20 Piece 1-1/4-Inch Reinforced Rotary Tool Cut-Off WheelsBest Price: $13.97 There are many different cutting wheels for the Dremel, but after using a lot of them I think... |  Fein 6-29-07-037-00-3 Allan Key for FSC 2.0Best Price: $8.95 Fein 62907037003 Allen Key |  Fein 6-35-02-135-01-9 1-3/8-Inch SuperCut E-cut Blade, 1-PackBest Price: $24.17 E-Cut Saw Blade for universal application. Suitable for wood, plasterboard and many plastics.... |  Fein 6-35-02-120-01-2 1-3/4-Inch SuperCut Precison E-cut Blade, 1-PackBest Price: $19.99 Includes 1-3/4-in Precision E-Cut SuperCut Blade - 63502120012 |
 Fein 6-35-02-116-01-4 Thin Diamond Coated Flush Cut Saw BladeBest Price: $73.00 This blade lives up to its reputation of lasting for a long, long time. I've used it to cut... |  SE 1" Abrasive Wheel with 1/8" Mandrel,240 GritBest Price: $0.76 15/16 inch 240 Grit Aluminum Oxide Abrasive Buff Wheel, 1/4 inch thick. 1/8 inch shank. For use... |  12 Piece Long Drum Sander KitBest Price: $23.99 Kit contains 4 drums, 4 fine and 4 coarse replacement sleeves. Extra length ideal for sanding... |  Dremel 566 Cutting Adapter & BitBulk Packaged Dremel 566 cutting adapter, carbide tile bit, and instructions. Not for Floor... |  Chicago Power Tools 63519 9-Volt 230-Piece Cordless Rotary Tool SetBest Price: $57.98 The tool itself worked well, but after very little use over a 2-year period, the battery failed.... |
 Chicago Power Tools 63557 208-Piece Rotary Tool Accessory SetBest Price: $29.99 Chicago Power Tools 208 Piece Rotary Tool Accessory Set |  Champion CT300-3/4 RotoBrute 3/4-Inch Carbide Tipped Annular CutterBest Price: $82.80 |  BOSCH POWER TOOLS MG0450 RUBBER BACKING PAD - 4-1/2" (PACK OF 6)"BOSCH" RUBBER BACKING PAD Dia. 4-1/2" Includes Nut Arbor Thread - TPI or... |  SEPTLS11483142 - Silicon Carbide Grinding StonesSilicon Carbide Grinding Stones |  Rubberized Abrasive Cylinder - 800 Grit Silicon Carbide 3/32" ShankBest Price: $2.00 The Rubberized Abrasive Cylinder - 800 Grit has silicon carbide imbedded into the rubber. They... |
 Fein 32119116011 SUPERCUT HANDLE - FSC 2.0Fein 32119116011 SUPERCUT HANDLE - FSC 2.0 |  Dremel 114-444: Sanding Bands |  Steel Wire Brush - 2 1/4" L - 3/16" Shaft - 3/8" x 1/4"The 3/8" long crimped steel wires are firmly attached by the steel clamp casing. The... | Chicago Power Tools 63519 9-Volt 230-Piece Cordless Rotary Tool Set Best Price: $57.98 The tool itself worked well, but after very little use over a 2-year period, the battery failed.... | Chicago Power Tools 63557 208-Piece Rotary Tool Accessory Set Best Price: $29.99 Chicago Power Tools 208 Piece Rotary Tool Accessory Set |
| Champion CT300-3/4 RotoBrute 3/4-Inch Carbide Tipped Annular Cutter Best Price: $82.80 | BOSCH POWER TOOLS MG0450 RUBBER BACKING PAD - 4-1/2" (PACK OF 6) "BOSCH" RUBBER BACKING PAD Dia. 4-1/2" Includes Nut Arbor Thread - TPI or... | SEPTLS11483142 - Silicon Carbide Grinding Stones Silicon Carbide Grinding Stones | Rubberized Abrasive Cylinder - 800 Grit Silicon Carbide 3/32" Shank Best Price: $2.00 The Rubberized Abrasive Cylinder - 800 Grit has silicon carbide imbedded into the rubber. They... | Fein 32119116011 SUPERCUT HANDLE - FSC 2.0 Fein 32119116011 SUPERCUT HANDLE - FSC 2.0 |
| Dremel 114-444: Sanding Bands | Steel Wire Brush - 2 1/4" L - 3/16" Shaft - 3/8" x 1/4" The 3/8" long crimped steel wires are firmly attached by the steel clamp casing. The... |  FOREDOM Flexible Shaft Replacement Brushes (Pair) 1/3 HP TX ModelBest Price: $7.99 Flexible Shaft Brushes 1/3 HP TX Model |  Dremel 903 5/16 inch Wheel Grinding StoneAluminum oxide general purpose grinding stones. Good for low to high carbon steels. Made of... |  Wecheer Replacement Cable for WE-330RBest Price: $13.99 Replacment cable for WE-330R. Factory supplied perfect replacement for damaged or worn cable... |
 FOREDOM Flexible Shaft Brushes (Pair) 1/6 HP SR ModelBest Price: $5.49 Flexible Shaft Brushes 1/6 HP SR Model |  Vermont American 14113 Rotary Hammer BitsBest Price: $24.12 Vermont American 14113 Rotary Hammer BitsVermont American 14113 Rotary Hammer Bits Features:;... |  5 Pack Dremel 90929 Carbon Motor Brushes for 275, 285, 395Dremel 90929 For use with Model 275, 285 and 395 Dremel Contour Sander (Type 1 and 2). |  Enkay 357-C 5 Piece High Speed Steel Rotary File Set. Made in England.Best Price: $35.00 Includes: 3 Piece Interchangeable Heads. 1 of 6" x 1/4" Shank. 1 of 1-3/4" X... |  Dremel 114-7134: Diamond Wheel Points |
 TR30 - 100 Grit Diamond Bur - 3/32" Shank (Made In USA)Best Price: $6.95 The 100 Grit TR30 (photo shown is 150 Grit) is a tapered diamond bur with a rounded end. The... |  TR30 - 150 Grit Diamond Bur - 3/32" Shank (Made In USA)Best Price: $6.95 The 150 Grit TR30 (photo shown is 150 Grit) is a tapered diamond bur with a rounded end. The... |  TR30 - 400 Grit Diamond Bur - 3/32" Shank (Made In USA)Best Price: $6.95 The 400 Grit TR30 (photo shown is 150 Grit) is a tapered diamond bur with a rounded end. The... |  T44 - 80 Grit Diamond Bur - 3/32" Shank (Made In USA)Best Price: $6.95 The 80 Grit T44 (photo shown is 150 Grit) is a tapered diamond bur with a flat end. The... |  T22 - 150 Grit Diamond Bur - 3/32" Shank (Made In USA)Best Price: $6.95 The 150 Grit T22 (photo shown is 150 Grit) is a tapered diamond bur with a flat end. The... |
 BW4 - 40 Grit Diamond Bur - 3/32" Shank (Made In USA) - 3mm x 10mm Wheel With Rounded EdgesBest Price: $7.75 The 40 Grit BW4 (photo shown is 150 Grit) is a wheel shaped diamond bur. The approximate head... |  SG1 - 150 Grit Diamond Bur - 3/32" Shank (Made In USA) - Inverted Cone - Approximately 2.3mm diameter x 2mm head lengthBest Price: $6.95 The 150 Grit SG1 (photo shown is 150 Grit) is a wheel shaped diamond bur. The approximate head... |  Wecheer Replacement Collet for Detail Handpiece, 1/8"Wecheer Replacement Collet for Detail Hand piece, 1/8". Factory supplied perfect... |  Diamond Burr Set 20pc 3/32 inch shank20pc 150 Grit Diamond Burr Set, 3/32 inch Shank. For use with Dremel Rotary Tools. Diamond... |  1/8" Shank HSS Router Bit 3/16 Straight Fits DremelBest Price: $3.29 |
 Century Drill and Tool Corp 75406 Rotary File Cylinder ShapedBest Price: $3.21 CYLINDER ROTARY FILE - Safe max RPM Speed 5,000 |  OTMT 60 Piece Rotary Tool & Accessory Set - Model: OTMT 8011 Frequency: 60 Hz RPM: 8,000 ~ 18,000 RPMBest Price: $36.99 Includes: (1) Grinder. (10) Grinding wheels. (20) Diamond cutters. (4) Felt wheels. (3) Collets.... |  1/8" Shank HSS 1/4" Plunge Router Bit - Fits DremelBest Price: $2.97 |  KENT, 3" Triangular Carbide Rasps, For: Cement, Granite, Brick, Fits Sonicrafter Worx, Rigid Job Max, RockwellBest Price: $19.89 Oscillating Multi Function Saw Blade For Sonicrafter Worx 3" Triangular Carbide Rasp... |  1/8" Shank HSS Router Bit 1/4" Straight Fits DremelBest Price: $3.79 |
 IIT 80525 Steel Wire Wheel Set - 3 PieceBest Price: $3.85 These are great for cleaning, polishing and producing special finishes. Precision made excellent... |  Milwaukee 48-66-4040 Chuck Key Holder For Chuck Keys 48-66-3080, 48-66-3240, 48-66-3280 and 48-66-3480Best Price: $2.95 Milwaukee 48-66-4040 This Chuck Key Holder securely attaches chuck key 48-66-3280, 48-66-2110,... |  Dremel 414 Felt Polishing Wheel 1/2" Diameter, 6 PackBest Price: $2.37 These felt wheel pads have proved to be great at polishing and cleaning. When combined with the... | ||
See also for Rotary Tool Accessories