 |
RM-202AA ROTOMATIC "AUTOMATIC" with air actuated clamping cuts 3/8" Flex by Seatek Co. Inc.
Product DetailsManufacturer: Seatek Co. Inc. Product features: - Ideal for making "Whips" & stripping MC/BX cable, great for contractors on large job sites
- Eliminates deburring and nicking of wires
- The open channel construction allows cutting or stripping anywhere along the cable
- Adjustable cable guide allows lateral adjustment for different cable pitches
- RM-202 has a lateral cable clamping pin adjustment for different cable pitches
Description of RM-202AA ROTOMATIC "AUTOMATIC" with air actuated clamping cuts 3/8" FlexMC & FLEX CUTTING MACHINE. CUTS AC, MC, HCF & BX FROM 14-2 TO 8-4 AND 3/8" FLEX. RANGE 7/16" TO 5/8" O.D. CUTS 1/2" FLEX WITH CLAMPING PIN SP-203. 110 V.A.C. MOTOR & 40 PSI AIR FOR CYLINDER. GREAT FOR "WHIPS" FABRICATION. The ROTOMATIC RM-202AA with automatic cable cutting drastically cuts labor time insuring clean, fast stripping without damaging the wire inside the cable. Never use a hacksaw again! Simply set the length to be stripped, insert the cable until it activates the sensor. The Rotomatic will then automatically make the cut, sending the clamping pin down which in turn drives the cable over the motorized cutting wheel, splitting the armor casing. To remove the armor just untwist the cable until the casing slips off! An adjustable stop permits varying the depth of cut for different cables. The RM-202AA's cutting action is driven by a large air cylinder providing fast and smooth operation. The front of the ROTOMATIC is protected by an unbreakable plexi-glass shield. To insure safe operation the adjustable blade guard is integral to the cutting action and depth of cut setting on the RM-202. The clean cut parallel to the cable axis eliminates deburring of flexible conduit ends. This feature prevents damage to the wire's insulation caused by sloppy manual deburring. For best results we recommend the use of screw clamping and squeeze type connectors.
Wire Strippers
|
 |
|
|
|