 |
RM-202M ROTOMATIC With Manual Lever Cuts Flex 3/8" to 1/2" by Seatek Co. Inc.
Product DetailsManufacturer: Seatek Co. Inc. Product features: - Ideal for making "Whips" & stripping MC/BX cable, great for contractors on large job sites
- Eliminates deburring and nicking of wires
- The open channel construction allows cutting or stripping anywhere along the cable
- Adjustable cable guide allows lateral adjustment for different cable pitches
- RM-202 has a lateral cable clamping pin adjustment for different cable pitches
Description of RM-202M ROTOMATIC With Manual Lever Cuts Flex 3/8" to 1/2"RM-202M ROTOMATIC With Manual Lever Cuts Flex 3/8" to 1/2" and cuts AC, MC, HCF & BX from 14-4 to 4-4. Range 7/16" to 7/8" O.D. Cutting stroke actuated by hand lever (NO AIR NEEDED). The ROTOMATIC drastically cuts labor time insuring clean, fast stripping without damaging the wire inside the cable. Never use a hacksaw again! The open channel construction allows cutting or stripping anywhere along the cable. Just pull down on the lever to cut the armor casing. To remove the armor just untwist the cable and the casing slips off! An adjustable limit stop permits varying the depth of cut for different cables. The RM-202M with a manual lever is ideal when compressed air is not available. The front of the ROTOMATIC is protected by an unbreakable plexi-glass shield. To insure safe operation the adjustable blade guard is integral to the cutting action and depth of cut setting on the RM-202. The clean cut parallel to the cable axis eliminates deburring of flexible conduit ends. This feature prevents damage to the wire's insulation caused by sloppy manual deburring. For best results we recommend the use of screw clamping and squeeze type connectors. (Check your local electrical code)
Strippers & Crimpers
|
 |
|
|
|