 |
Sinometer AC/DC Auto/Manual Range Digital Multimeter, MS8268 by Sinometer
List Price: $59.95Our Price: $34.91You Save: $25.04 (42%)Availability: Usually ships in 1-2 business days Category: BISS See more product details
Product DetailsManufacturer: Sinometer Brand: Sinometer Publisher: Sinometer Studio: Sinometer Music Label: Sinometer Product features: - AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity
- LED / Sound Warning when incorrect banana jacks are used relative to function switch setting
- Auto and Manual Ranging with Relative measurement (all ranges except frequency)
- All range fused (resettable) with 1 Year Warranty
- Auto power off (could be disabled) & Blue LED Back-lit LCD display
Description of Sinometer AC/DC Auto/Manual Range Digital Multimeter, MS8268The newly released Sinometer MS8268 is an auto/manual ranging digital multimeter. It is packed with many nice features such as sound and light warning for the jacks and back-lit LCD Screen. This meter powers on three AAA batteries. Accessories include test leads & user Manual
Tools and Hardware Reviews of Sinometer AC/DC Auto/Manual Range Digital Multimeter, MS8268Customer Review: Very good multimeter for it's price Summary: 5 Stars
In general, this is a great device for this cost range. It has all features required for daily usage. Description of multimeter can be found in internet. Here are some specific features:
- In any range two terminals to be used are illuminated with red LEDs (see foto). LED is swithed off when lead is pushed into terminal. If lead is pushed into wrong terminal for this range then correct terminal blinks and beeps.
- Automatic range; manual range selection with button.
- Wide set of ranges, including 400.0 mV and 400.0 uA
- Relative measurements and display hold. White backlight (5 seconds)
- Resettable fuse for current ranges (non-resettable for 10A range)
- Display data refresh: 3 per second.
Imperfection:
- Frequency measurement accuracy is low: 2%
- In accordance with manual, package must contain "Special Multi-Function socket" (required for hFE measurement). There was no such device in my package.
Tools & Testers
|
 |
|
|
|