 |
Waste King L-2600 Legend Series 1/2 HP Continuous Feed Operation Waste Disposer by Waste King
List Price: $154.00Our Price: Calculated in a shopping cartAvailability: Usually ships in 1-2 business days Category: Tools See more product details
Product DetailsManufacturer: Waste King Model: L-2600 Product features: - High speed of 2600-rpm
- 36-inch power cord is included
- Removable splash guard
- Space saving compact design
- Longest warranties in the industry demonstrates commitment to quality
Description of Waste King L-2600 Legend Series 1/2 HP Continuous Feed Operation Waste DisposerFinish/Color Options:Silver Waste King Legend Series L-2600 1/2 HP Fast and Easy Mounting Stainless Steel Grinding Components Safe for Properly Sized Septic Tanks Vortex Powered Motor The Waste King Legend 2600 1/2-Horsepower Disposer showcases a powerful motor, stainless steel grinding components, superior sound insulation, and a corrosion-proof grinding chamber for efficient, quiet, no-fuss waste disposal. Once installed, this continuous-feed waste disposer will more than earn its place in your kitchen. | The Legend 2600 1/2-Horsepower Disposer At a Glance:- 2,600 RPM permanent magnet motor
- Stainless steel swivel impellers reduce jamming
- Splash guard is removable and easy to clean
- Sound insulated to reduce noise
- 5-year mechanical warranty; lifetime corrosion warranty
|
|  |
|
 The Legend 2600 offers more power per pound than the competition. View larger. |
Experience a More Powerful Grind Featuring an energy-efficient, high-speed, 2,600 RPM 'Vortex' permanent magnet motor, the Legend 2600 offers more power per pound than comparative disposers. This 0.5-horsepower motor will grind tough foods, and it requires 115 volts, 60 Hertz, and 4.5 current-amps to operate. Jam-Free, Mess-Free Feeds The Legend 2600 is a continuous-feed disposer, which means you can add waste while the unit runs. Stainless steel swivel impellers reduce jamming, and an easily removable splash guard keeps things tidy. A front-mounted reset button allows for simple operation. Grinding Components Minimize Noise and Wear Because the Legend 2600's grinding chamber is made of glass-filled nylon, you will never have to worry about corrosion. Also, the stainless steel grinding components are insulated, so you'll get the quietest grind possible. Easy Installation; Works with Septic Tanks The Waste King Legend 2600 includes a fast-and-easy mount system, with all the necessary hardware for no-hassle installation. The disposer is safe for properly sized septic tanks and comes with a power cord. Five-Year In-Home Service Warranty The Waste King Legend 2600 is backed by a limited mechanical warranty. This means that if your disposer develops a material or mechanical defect within five years of purchase, it will be replaced in your home--free of charge. The disposer also comes with a lifetime warranty against corrosion. What's in the Box The Waste King Legend 2600 1/2-Horsepower Disposer, mounting hardware, and power cord.
Tools and Hardware Reviews of Waste King L-2600 Legend Series 1/2 HP Continuous Feed Operation Waste DisposerCustomer Review: First day review: Installation Full Marks Summary: 5 Stars
The installation was very easy for someone who has not done this sort of thing before. Saves about $150-$200 (plumbers quoted rate for disposal installation). The manual was detailed. I didn't have to look at web videos. Just spent 10 - 15 minutes skimming thru the manual. Removed the old Badger 5 - removing it was the difficult part. The installer of the Badger 5 had put glue and sealed the connection between the black elbow/bend pipe connector and the home 1 1/2" drain. So I had to cut just under the joint and remove the older black elbow/bend connector. Also the thin ring on the 3-bolt system was a bit tough to get off - had to use a strong screwdriver to push it down and out from the top - a difficult angle on something that is so close to the sink.
My sink is stainless steel so used the seal that came with the Waste King.
The Waste king comes with the black 1 1/4" elbow connector. Followed directions to first install the EZ mount on the stainless sink and test the seal by putting the stopper and half filling sink and letting stand for 3-4 minutes. Left the water in the sink for the duration of the install so that if any installation step causes seal break it will be known immediately.
Then I rushed to home depot to get the 1 1/2" to 1 1/4" reducer PVC connector (which I had had to cut off when I removed the Badger) and using glue connected it to the previously cut pipe - the plumbers glue has toxic fumes so make sure to properly ventilate if using the plumbers glue - horrible substance - glad I had to use it only once. Since I had made the cut very close, I did not need to patch the pipe with a union. Since PVC is a bit flexible when it comes to moving things around(as compared to metal pipes), I was able to slip the waste king black elbow into the PVC reducer connection and secure the connection with the screw type flange.
For electrical, if you are replacing a disposal that is directly connected to the home wiring without a wall outlet, then I would recommend the purchase of this part: Leviton 000-515CR-000 (15 Amp Rubber Grounding Plug, Black, also available in Vinyl for $4 - recommend the rubber version) - this is available on Amazon as well as in Home Depot/Lowes. It is only about $5 and saves having to cut or undo the three-prong plug on the waste king. You insert and affix your home wiring into this connector (of course after following necessary precaution of shutting off breaker). Then you plug the waste king into the other end of this which has a three prong female connector.
All the hammering to move the notch to the extreme left (as mentioned in the install guide) had caused the whole assembly to move a bit off the center when seen from the sink. But this was not something to worry. Gripping the Waste King with both hands, I was able to slide the whole assembly to a centered position without having to redo everything and the seal was still water tight.
The noise was much less than the badger. Every time you start it up, it has a little metallic click which can be especially heard if you do not have the strainer on. Initially I was a bit unsure if mine was defective, but then I RTFM where it was mentioned that this is normal.
Start time (start of opening the box and starting to read manual): 8:45 PM, end time 2 AM. In between took about 1.5 hour break to run to home depot as well as get dinner.
I will update review with actual usage experience as well as long term performance in a few months.
Result is not just that I saved money on the installation, but now feel confident to do a lot of minor plumbing tasks.
Considered new ISE low noise products before buying this, but didn't really feel that the trade off of noise to price was worth paying $100 plus. After all the disposal is used only once or twice a day for a few minutes and a 10-20% louder noise during these times is perfectly acceptable - this one does have good noise reduction though when compared to the badgers.
Would have been nice if Waste King had included the Leviton electrical connector as well as the PVC reducer in the package for upgraders, but for price that's expecting too much I guess.
Plumbing Fixtures & Faucets
|
 |