 |
Wiremold CMK50 CordMate II Computer and Home Entertainment Cord Cover Kit, White by Wiremold
List Price: $27.99Our Price: $16.17You Save: $11.82 (42%)Availability: Usually ships in 24 hours Category: Tools See more product details
Product DetailsManufacturer: Wiremold Model: CMK50 Product features: - Ideal for speaker cables, video cables, power cords
- Easy, peel and press installation
- For hiding several cords
- White, paintable
Description of Wiremold CMK50 CordMate II Computer and Home Entertainment Cord Cover Kit, Whitekit for hiding and organizing loose cables along a wall or baseboard * includes four 30" paintable wire channels, channel couplings, and two "elbow" corner pieces * channels attach to the wall with self-adhesive backing * channel's interior dimensions: 7/8"W x 3/8"H *
Tools and Hardware Reviews of Wiremold CMK50 CordMate II Computer and Home Entertainment Cord Cover Kit, WhiteCustomer Review: The wiremold system - a review of options Summary: 5 Stars
Wiremold has been around for years - although some electricans do use it in special situations, it is really intended for the homeowner to hide and mount cables on the wall (as opposed to in the wall like an electrician would) at a low cost for neatness (see my photo).
This product is the newer revision of the CMK210 which started out the flat screen/computer monitor/tv on wall mounting as it has enough channel space to hold 3 cables (TV, a/c power, computer e.g. HDMI) on the wall and still shut - internal dimentions of 7/8" x 3/8" accommodate most computer cables except those with RFI filters on them.
An alternative to the CMK50 is the CMK210 which has more joint pieces, like the T which I used for the AC plug to exit the wiremold and go into the outlet. Dimentionally, also the CMK210 gives you 3x4' pieces or 12 feet of channel while the CMK50 gives you 4x30 inches or 120 inches = 10 feet of channel, so you get some extra fittings and extra channel length in the cmk210. The amazon description of the cmk210 is off in that it gives a 1.2 x 2" channel size, in actuality the 210 and the 50 are almost identical in that they will hold 3 average size wires.
Another alternative for people who need more than 3 wires to their a/v on wall set is the cmk-30 which is a wide channel designed to hold many a/v cables between say an a/v rack and a wall mounted tv set.
Cautions for use:
The adhesive is really powerful once you peal the waxed paper - you have about 5 seconds before it's permanent on your painted surface, so a helper to hold a level plumb for vertical runs is nice to have. Also keep in mind that if you are running horizontally along the baseboard, while it may seem ideal to touch the baseboard, you need room for the joint clips which go over the outside - you can make a shim or you can just use the joint clips along the piece you are sticking to the wall to esure that there exists a gap sufficient to hold the various pieces between the wiremold ouside and the baseboard. These are not printed in the instructions, but having worked with their product now several times I found that you need to provide space for the clips or else you end up notching the baseboard or else breaking part of the clip that interferes and gluing it to the wiremold.
There is no hinge except the flexibility of the plastic, so don't plan to be opening/closing these channels often - they have a J hook that clips into a bead on the thin (3/8") side so closing is easy, just get it started and then run your fingers down the strip pressing it into the clip. Keep in mind if you ever plan to open this up, don't point the j-hook seam into the ground or a wall corner - point it up or into the room for access at a later date as things change. Opening it is somewhat tougher in that you have to undo the j hook by compressing the wiremold at one end, get a screwdriver or other instrument (putty knives work well) into the channel and separate it, working your way down the channel.
I can not overemphasize the importance of measure twice cut once - remember you get 4 30" pieces in this kit - if you cut carefully and strategically you will be able to use the waste piece in part of the run like around corners.
Once finished they can be painted but be sure not to get paint into the J-hook closure along the side because you will seal the channel (unless you want to seal it permanently then paint away!). Personally, I don't mind the white color but it is really your preference as to paint the surface or not.
Wiremold also sells the other fittings as separate parts, for example this kit does not include the T connector which is a great way to escape the wiremold channel neatly - as opposed to drilling holes in it which would look messy (I do drill a v notch on the back (sticky) side when I have a wire that has been run through the wall and is entering the wiremold, but I found that the best places to enter or exit are where there is a fitting such as a corner fitting which gives you more room than the channel does, especially in the -210 version.
So to sum it up -
For power/speaker cable, you get 10 feet with this kit the cmk-50 plus corner elbows
For wide channel with multiple (5+) cables you can use the cmk-30 a/v specialty
for a little longer system with more fittings and 2 extra feet the cmk-210 is almost identical to the cmk-50 (this one) but has the T connector, and on wall left/right fittings.
Do a little smart shopping with your measuring tape and read the product descriptions for wiremold products - they have been doing this for 2 decades+ now and have the method down for manufacturing. If you ensure the surface is free of dust and oil before sticking it it will hold as long as the wall is there but before pealing off the wax paper, mock up your entry and exit points with the provided clips and elbows so that you know where you need a tad extra gap for the fittings. I cut mine with a miter saw Hitachi C10FCE2 10-Inch Compound Miter Saw but you always make square cuts, so that's overkill - a hand hacksaw will work fine as will a sawzall, but using the high speed blade on the miter saw gives professional square cuts by slowly moving the blade through the channel, chipping small pieces. The only risk using power tools during cutting can crack the opposing side of the channel's plastic which I did trying to cut too fast- if you crack it, it mends well with shipping tape like amazon uses on the boxes they ship to you (clear).
Good luck with you neat cable project - patience, and measurement will ensure a perfect job when done. You will stand back and say it looks 1000 times better than the clutter of cables you had before.
Accessories & Supplies
|
 |
Premium 6 Foot High Speed HDMI Cable for your Sony BDP-S350 HDTV System / Player ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.A Days Tech; CEBest price: $9.99Price in other shops: $24.99
Premium 6 Foot HDMI Cable for your Funai B1-M110 Blu-Ray Player! Cables supports 1080p/ 24p format, 7.1 Digitial Audio and future software upgrades to your player.HDMI; CEBest price: $16.98Price in other shops: $39.99
Premium 25 Foot High Speed HDMI Cable for your Dynex DX-22LD150A11 HDTV ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.A Days Tech; CEBest price: $29.99Price in other shops: $59.99
Premium 50 Foot High Speed HDMI Cable for your Panasonic TC-L42U22 HDTV ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.A Days Tech; CEBest price: $64.99Price in other shops: $99.99
PROFESSIONAL 6 FT High Speed HDMI Cable for your TiVo TCD746320 Player ! Custom cable supports beyond 1080p with 4K, 3D, Deep Color, TrueHD Sound and 800Hz! (1.4a, 1.4, 1.3, 1.3b, 1.3c rated)A Days Tech; CEBest price: $18.99Price in other shops: $39.99
PROFESSIONAL 25 FT High Speed HDMI Cable for your Panasonic TC-L42U22 HDTV ! Custom cable supports beyond 1080p with 4K, 3D, Deep Color, TrueHD Sound and 800Hz! (1.4a, 1.4, 1.3, 1.3b, 1.3c rated)A Days Tech; CEBest price: $47.99Price in other shops: $99.99
Premium 10 Foot High Speed HDMI Cable for your TiVo TCD746320 Player ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.A Days Tech; CEBest price: $14.99Price in other shops: $24.99
PROFESSIONAL 10 FT High Speed HDMI Cable for your Element ELDTW422 HDTV ! Custom cable supports beyond 1080p with 4K, 3D, Deep Color, TrueHD Sound and 800Hz! (1.4a, 1.4, 1.3, 1.3b, 1.3c rated)A Days Tech; CEBest price: $24.99Price in other shops: $49.99
PROFESSIONAL 3 FT High Speed HDMI Cable for your Element ELGFT401 HDTV ! Custom cable supports beyond 1080p with 4K, 3D, Deep Color, TrueHD Sound and 800Hz! (1.4a, 1.4, 1.3, 1.3b, 1.3c rated)A Days Tech; CEBest price: $9.99Price in other shops: $24.99
ADVANCED HIGH SPEED DIGITAL 3 FT HDMI 24k GOLD SEALED CONNECTOR CABLE ! One of few cables certified to support future upgrades to your HDTV devices. Supports: 1440p,1080p,1080i,720p,480p, HDMI Category 2 v1.3a Certified, Xbox 360, PS3, PS4, Playstation 3, Blu-Ray, HD-DVD, refresh rate of 340 Mhz, and 192 kHz/ 24-bit high-resolution audio for ultimate 5.1/ 7.1 surround sound, and 10.2 Gbps minimum bandwidth (Compare to Monster MC1000hd, MC800hd, MC700hd, MC500hd, 1M Meter Cable)A Days Tech; CEBest price: $7.66Price in other shops: $29.99
|
|